Search Jobs

Filter Jobs


Industry

Employment Type

Location


Wichita, KS

Job Title: Kitting/Picking Clerk in Warehouse environment

Shift: 1st, 2nd and 3rd shifts available

Days/Hours: Monday - Friday OR Sunday - Thursday (hours will be appropriate with shift schedule)

Pay Range:$10.00-$11.00 per hr.

Picking and packaging of Aircraft parts for distribution.

Responsibilities/Duties:
  • Pick parts using Company specific software
  • Pick multiple orders using Voice to manual Picking function
  • Recognize damaged parts and inventory shortages and notify Quality Control
  • Know the proper packaging methods for protected parts referencing Material Handling Procedures.
  • Assist QC with the kitting of parts, utilizing carts and kit boxes as required by documented procedures.
  • Assist QC with the preparation of outbound orders including attaching required documentation and staging product for shipment.

Requirements:

High school Diploma or GED preferred.

Computerized Voice Recognition software preferred

General Aircraft

Detailed Orientated

Organizational Skills

Ability to lift 30 lbs

Repetitive bending, squatting, reaching and walking


  • Must be able to work in a fast paced environment with an emphasis on teamwork, good organizational skills, and be detailed orientated.
  • Must be able to cross train and understand all aspects of the department functions.



APPLY ONLINE AT: www.Lsistaffing.Com or in person at:

250 North Kansas

Wichita, Ks. 67214

Hours accepting application: 8: 00 am - 11: 00 am Monday, Tuesday and Thursdays.

EOE
Pay Rate: $10.00 - $10.50
Wichita, KS

Local Southside Manufacturing Company /Truss Builder looking for assemblers.

1st shift $9.00 long term temp assignment with possible perm hire after 90 days.

Must be able to stand an 8-10 hour day. Bend, twist, and stoop for long periods of time. Lift 50lbs consistently. Ablilty to work in the heat of the summer. Ability to use a hammer and measuring tape is very helpful.

Apply at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.

 
Wichita, KS

3 Axis CNC Machinist, Experience of 3 or more years. Ability to program with conversational control, set-up and run short order runs. Culture is clean and climate controlled in Machinist area of plant. Small family owned business. Good Benefits after hire for small company. Health benefits for EE only, vacation, holiday pay, year end bonus and may start a simple IRA and match 3% at 100%. 

  30 min lunch at 11: 30 and 2 10 mins breaks. OT on Saturday at times and may get off at 3: 30p some Fridays. Flexible to working Saturdays at times.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing from 8-11am Monday/Tuesday/Thursday.

 
Wichita, KS

1st shift Matrial Support $10.00  DOE  Temp to HIre

  Need clean driving record and forklift skills. Pack, label and ship all products. Deliver shipments to local customers, in addition to drop off and pick up miscellaneous items for supporting the company staff. Coordinate all pick-up, deliveries and work flow in the Shipping/Receiving, Traffic area. Receive incoming deliveries and distribute proper paperwork. Route incoming materials from dock to stock after receiving inspection. Kit and issue work orders. Issue supplies and cycle count all raw materials. Education: High school diploma or general education degree (GED) preferred Experience: Valid Kansas Drivers License Previous work related experience preferred Ability to operate forklift Ability to use a computer to enter records Wage: $10 + DOE

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing from 8-11am Monday/Tuesday/Thursday.
Wichita, KS

1st shift Temp to Hire $10.00-12.00 DOE

Needed for aircraft window manufacturing. Will need at least 1 maybe 2 to start out in Polish Wet Buff/ Dry Buff - auto body folks seem to do well (they understand the terms orange peel) They will use orbital sanders and different grits of sanders to remove surface damage to acrylic and/or buffers with polish & wax.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing from 8-11am Monday/Tuesday/Thursday.
Wichita, KS

Immedidate need of experienced   OD Centerless Grinder

$10.00-14.00 DOE 1st shift  Temp to Hire

 

Apply online www.Lsistaffing.Com or In Person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs
Wichita, KS

Immedidate Need for experience Sheetmetal Assemblers $13.00 1st and 2nd shifts NE Aerospace Co.

Temp to Hire

Need good measuring skills preferred 1 yr aerospace sheetmetal experience.

Apply online at: www.Lsistaffing.Com  or Apply in person at LSI Staffing 250 N. Kansas from 8-11am on Monday/Tuesday/Thursday.
Wichita, KS

Immediate need for experience COLOR MATCHER $12.00-14.00 DOE

1st shift Temp to Hire  Local Northside Wichita Company looking for 2 yrs exprience with paint color matching.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thursday.

 

 

 

 
Wichita, KS

CNC Operators 3-5axis

Weekend Shift - Friday - Sunday 6: 30a-3: 00P or 7: 30a-4: 00P Temporaries are only paid for hours they work not the additional 4.75. Weekend shift hours are 35.25 hours. Permanent employees work 35.25 and are paid the extra 4.75 to equal 40. Pay Range is: $12.50-$18.00 DOE

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

CNC Operators 3-5axis Prefer 2 yr experience Helpful to have some programming experience.

2nd shift  Temp to Hire $14.00-16.00

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

CNC Operators 3-5axis  Prefer 2 yrs experience

Temp to hire 1st shift  $14.00-16.00DOE

Good organizational skillls/measuring skills, blue print reading

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

POSITION: CNC Machinist "B"   All shifts - wages $12.00-17.00 DOE Wichita Company

REPORTS TO:
Machine Shop Supervisor

STATUS:
Non-Exempt

SUPERVISES:
N/A



POSITION SUMMARY:

Sets up and operates numerical control machine (CNC) and other machines to cut, shape, or form metal work pieces to specifications.





ESSENTIAL JOB FUNCTIONS:

    • Reviews setup sheet and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece.



    • Works from prints, sketches, drawing, shop routings, machine tapes, machining procedures, shop practices, engineering and other information.



    • Attaches fixture to machine bed and positions and secures workpiece in fixture according to set up instructions.



    • Assemble cutting tools as specified.



    • Manipulates controls and enters commands to index cutting tool to specified set point.



    • Changes cutting tools and location of work piece during machining process as specified in set up instructions.



    • Measures workpiece for conformance to specification, using measuring instruments, such as micrometers, dial indicators, and gauges.



    • Adjust machine feed and speed and change cutters to machine parts according to specifications when automatic programming is faulty or machine malfunction.



    • Operates all equipment in accordance with established operational procedures, safety procedure, shop practice and sequences. Anticipates problems and prevents damage and scrap by taking appropriate precautionary care.







JOB QUALIFICATIONS:

    • 2 to 5 years of prior CNC set up and operating experience.



    • Can read and understand engineering (part) drawings and tool designs.



    • Good working knowledge of shop math.



    • Can read and understand plannings.







PHYSICAL REQUIREMENTS AND WORKING CONDITIONS:

    • Able to stand, walk, push, pull, reach overhead, and bend to the floor.



    • Able to exert 20 to 50 lbs. Of force frequently



    • Subject to high noise levels from operating machines



    • Physical hazards from moving equipment and machine parts.



    • Breathing fumes, dust, and mist.



    • Skin exposure to oils and cutting fluid.









The above job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required by the employee. Employees may be required to follow other job-related instructions or perform other duties as requested.









POSITION: CNC Machinist "B"REPORTS TO: Machine Shop SupervisorSTATUS: Non-ExemptSUPERVISES: N/A

POSITION SUMMARY:

Sets up and operates numerical control machine (CNC) and other machines to cut, shape, or form metal work pieces to specifications.





ESSENTIAL JOB FUNCTIONS:

    • Reviews setup sheet and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece.



    • Works from prints, sketches, drawing, shop routings, machine tapes, machining procedures, shop practices, engineering and other information.



    • Attaches fixture to machine bed and positions and secures workpiece in fixture according to set up instructions.



    • Assemble cutting tools as specified.



    • Manipulates controls and enters commands to index cutting tool to specified set point.



    • Changes cutting tools and location of work piece during machining process as specified in set up instructions.



    • Measures workpiece for conformance to specification, using measuring instruments, such as micrometers, dial indicators, and gauges.



    • Adjust machine feed and speed and change cutters to machine parts according to specifications when automatic programming is faulty or machine malfunction.



    • Operates all equipment in accordance with established operational procedures, safety procedure, shop practice and sequences. Anticipates problems and prevents damage and scrap by taking appropriate precautionary care.





JOB QUALIFICATIONS:

    • 2 to 5 years of prior CNC set up and operating experience.



    • Can read and understand engineering (part) drawings and tool designs.



    • Good working knowledge of shop math.



    • Can read and understand plannings.





PHYSICAL REQUIREMENTS AND WORKING CONDITIONS:

    • Able to stand, walk, push, pull, reach overhead, and bend to the floor.



    • Able to exert 20 to 50 lbs. Of force frequently



    • Subject to high noise levels from operating machines



    • Physical hazards from moving equipment and machine parts.



    • Breathing fumes, dust, and mist.



    • Skin exposure to oils and cutting fluid.









The above job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required by the employee. Employees may be required to follow other job-related instructions or perform other duties as requested.




































Wichita, KS

Production / Milling Department





Employee Name:



Job Title:
Mill Operator / Production



Reports To:
Manufacturing Manager



Basic Functions:
Responsible for manufacturing of paints, thinners, and other products. Responsible for maintaining a clean and safe work area.



Duties:



  • Manufacture paints and related products as instructed on the batch tickets



  • Maintain manufacturing equipment in clean and same operating condition



  • Unload bulk trucks of resins and solvents. (See procedures for unloading bulk trucks.)



  • Receive raw materials and store in designated locations



  • Collect hazardous waste consistent with established hazardous waste management practices



  • Conduct monthly inventory of all raw materials and assist in the quarterly finished goods inventory



  • Keep marked areas and exits clear for emergency evacuation



  • Shut down all equipment and cover all containers of paint and paint related products at the end of the work shift





Personnel in this department may be called upon to perform activities and to assist in other departments from time to time.



Hazardous Waste Training
: Personnel in this department will receive both classroom and on-the-job introductory hazardous waste training, as well as annual training, sufficient for the employees to perform their duties in a way that ensures the facility s compliance with the requirements of the hazardous waste management procedures and contingency plan implementation. This instruction consists of both in-house and third party training. An annual training session will be provided to all facility personnel by Milestone Environmental.
Wichita, KS

Local Aerospace company in need of Sheetmetal Supervisor and Trainee both 1st and 2nd shifts.

Wages DOE. 

Need 3 yr min. Experience with Spvr in Sheetmetal Assembly.

Apply at www.Lsistaffing.Com or in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs
Wichita, KS

Need good assembly experience. $9.00 2nd shift working around fiberglass

 - Need ITAR Documentation Must have good assembly skills and able to work in the heat.

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

 $9.00 2nd shift Upholstery dept. Looking for Assembler with mfg experience. Lots of hand skills.

 

- good assembly skills preferred - - Need ITAR ID's . 3: 30pm-12: 30am shift Work with Kevlar and Fiberglass in the heat!

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

  Aerospace Layup 1st shift $9.00-10.00

Layup  (experience preferred) Would like someone able to read work orders-

 

ITAR Ids Needed U/A dt -

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

1st shift Upholstry Need good assembly skills

 

  ITAR documentation Good reading/writing- for work orders. Must pass UA

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

Layup Tech $9.00-10.00DOE

Must have 1 yr experience in aerospace layup.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

Immediate Need for experience Forklift Drivers for flexible 1st and 2nd shifts., $12.00-12.75DOE

Must have good physical strength - lift 50lbs constantly - RF Scanner

GOOD WORK ETHIC

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

Local South Wichita Company! Immediate need of Screener in Silk Screen industry

1st shit Screener in Printing industry

  Need prior screening experience like Beverly Phillips $9.00-10.00DOE

  good hand/eye coordination

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Wichita, KS

- Autoclave/Oven Operator (experience preferred)

2nd shift $10.00-11.00 DOE

Westside Fiberglass company looking for experienced aerospace Autoclave.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
Pay Rate: $10.00 - $12.00
Wichita, KS

2nd shit  Painter   (aerospace paint experience strongly preferred) ITAR IDS - - Must pass U/A

$12.00-17.00  Prefer spray booth paint experince for at least 2 yrs.

 

Apply online at www.Lsistaffing.Com or Apply in person at LSI Stafffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
WICHITA, KS

2nd  shift Sheetmetal Assembler $13.00 Temp to Hire

Must have 1 year experience with Sheetmetal Bench Assembly

Good work ethic. Abilty to work with blue prints, hand assemblies.

 

Apply at lsistaffing.Com or Apply in person at LSI Staffing from 8-11am Mon/Tues/Thurs.
WICHITA, KS

Quality FAI Inspection on Sheetmetal and Machined Parts with some Assemblies. 1st shift Temp to Hire $12.00-16.00 DOE to start

 

We are looking for a First and/or Second shift Bench Inspector with a pay range of $12 - $16/hour. We are less focused on CMM experience this round, as they will be using Inspection hand tools such as calipers, height gages, etc. Their main duty will be the inspection of our Sheet Metal and Machined parts, with some Assemblies. We would like them to have some experience or knowledge of Frist Articles, Blueprint reading and In-Process Inspection.

Apply at www.Lsistaffing.Com or come in to apply at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs.
WICHITA, KS

CNC Machinists  Temp to Hire

2nd  shift  and weekend day shift  $12.00-15.00 DOE

 

Need experience CNC Mill and Lathe for 3rd shift NW side Company in Wichita.

Prefer 1 yr experience with setup and run machines. Blue print with micrometer and caliper reading.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N.Kansas from 8-11am Monday/Tuesday/Thursday.
WICHITA, KS

SW Wichita Aerospace Company in immedidate need of CNC Machinists

$12.00-14.00  1st and 2nd shifts

Apply online at www.Lsistaffingcom or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thursday!

 
WICHITA, KS

We have an immediate need for assemblers one opening on 1st,

Wages $12.00-14.00DOE Must have Sheeetmetal expeirence from Aerospace

Apply online at www.Lsistafifng.Com or Apply in person at LSI Staffing 250 N. Kansas from 8-11am Mon/Tues/Thurs
WICHITA, KS

Sheetmetal Assembly - $12.00-13.00 DOE

Need good experience with aerospace sheetmetal skills

blue print reading

Apply online at www.Lsistaffing.Com or Come in person at LSI Staffing frojm 8-11am Mon/Tues/Thurs.
Pay Rate: $12.00 - $13.00
Valley Center, KS

ASSEMBLERS NEEDED AT NORTHSIDE TRUSS PLANT.

2pm-11: 30pm -Must be available to work OT hours!

Ability to stand 10 hour days.

Lift 50lbs frequently

Work in non air-conditioned environment.

Spanish Speakers encouraged to apply.

Must be able to work around wood dust.

Apply at LSI Staffing

250 N. Kansas

8-11am Mon/Tues/Thurs.

or go to website: www.Lsistaffing.Com
OMAHA, NE

LSI Staffing is seeking a Receptionist for one of our clients in Omaha. Responsibilities will include but are not limited to answering the phone in the office, data entry, filing, shipping documents, maintaining packing lists, etc. A good phone voice, customer service skills, typing ability and a high propensity for detail are the primary attributes for this role. This is a temp to hire position and good attendance is critical. A background check will be required.

*You can apply in person Monday - Friday 8: 00AM-11: 00AM @ 4228 S. 50th Street in the Spring Valley Shopping Plaza.

*We offer paid holidays, paid vacation, 401k, and insurance.

*Ask about our employee referral program and earn extra CASH!
OMAHA, NE

LSI Staffing is seeking hard working, dedicated individuals to work in a production environment for one of our clients. Hours will be Monday-Friday 2: 00PM-11: 00PM. You will be required to work 40 Saturdays a year, which will pay time and a half. Attendance is critical! If you miss a day in your first 90 days you will be terminated. Responsibilities will include washing out combos that contained meat. After 3-4 weeks of this work you will begin to rotate into one of the other 3 positions on the line. Previous experience working in the meat packing industry required.

You must be able to lift 80 lbs.
OMAHA, NE

We're seeking a Production Technician for one of our manufacturing clients in South Omaha to aid in the processing of pharmaceuticals. The position hours are 7: 00am-3: 30pm M-F with the opportunity for up to 10 hours of OT. You must be able to lift up to 70 lbs. And have an aptitude for math. This will be a temp to hire opportunity. Pay is $9.00/hr. A criminal background check and drug screen will be required. *You can apply in person Monday -- Friday 8am to 11am @ 4228 S. 50th Street in the Spring Valley Shopping Plaza.*You can also apply on-line @ LSI Staffing.Com.*We offer paid holidays, paid vacation, 401k, and insurance.*Ask about our employee referral program and earn extra CASH!
OMAHA, NE

This position is responsible for all activities relating to the manufacture of spray dried products according to Good Manufacturing Practices. The Spray Dryer Coordinator directs and works with employees to: 1. Manufacture products and document associated activities according to Good Manufacturing Procedures (GMPs), Standard Operating Procedures (SOPs), Manufacturing Instructions ( MIs).2. Strive to improve cleaning and processing efficiencies, increase physical and potency yields, and enhance the bacterial qualities of the dried product.3. Timely schedule and document equipment repairs, maintenance, and calibration activities to maintain equipment operational and calibrated according to regulatory standards.4. Develop and promote good will, a favorable attitude, and cooperation among employees.5. Communicate your actions and intentions to your supervisor in a timely fashion.6. Make generalizations, evaluations, and decisions within established company practices and guidelines as directed by your supervisor.7. Perform various duties assigned by the Vice President-Production. REQUIREMENTS: 1. Lift up to 60 poiunds several time a week and roll up to 500 pound barrels daily2. Climb ladders daily.3. Twist, bend and lift materials out of drums daily4. Handle hazardous chemicals.5. Stand on concrete floos for long periods of time.6. High school diploma or equivalent, a minimum of 2 years post HS education and some work experience in a similar field. Or a 4 year college degree. A criminal background check and drug screen will be required. *You can apply in person Monday -- Friday 8am to 11am @ 4228 S. 50th Street in the Spring Valley Shopping Plaza.*You can also apply on-line at www.Lsistaffing.Com*We offer paid holidays, paid vacation, 401k, and insurance.*Ask about our employee referral program and earn extra CASH!
Norwich, KS

Plant Maintenance Mechanic in Norwich, KS

1st shift $15.00-17.00 DOE  Immediate Opening!

MUst have mechanical, hyrdaulics, pnuematics, and electrical.

Apply online at www.Lsistaffing.Com or Apply in person at LSI Staffing 250 N.Kansas from 8-11am Monday/Tuesday/Thursday.
Moundridge, KS

Bradbury in Moundridge is hiring through LSI Staffing:



All positions are 90 day temp to hire and are on 2nd shift: 3: 30pm-Midnight. 10-15% Overtime Available.

Physically demanding positions requiring 50-100 Pounds lifting at times.

A good candidate must possess Industrial Experience with preference giving to Machinist Experience or Metal working. Must be mechanically inclined. Good work ethic and motivation. . Ability to read a tape measure and use calipers/micrometers. Ability to pass a pre-employment drug screen.

Company will train the right individual but experience is strongly preferred. Requires Steel Toed Boots.

$12-$22/hr Based on Experience. Shift differential on 2nd shift of $1.00 per hour.
Moundridge, KS

Bradbury in Moundridge is hiring through LSI Staffing:



All positions are 90 day temp to hire and are on 2nd shift: 3: 30pm-Midnight. 10-15% Overtime Available.

Physically demanding positions requiring 50-100 Pounds lifting at times.

A good candidate must possess Industrial Experience with preference giving to Machinist Experience or Metal working. Must be mechanically inclined. Good work ethic and motivation. . Ability to read a tape measure and use calipers/micrometers. Ability to pass a pre-employment drug screen.

Company will train the right individual but experience is strongly preferred. Requires Steel Toed Boots.

$12-$22/hr Based on Experience. Shift differential on 2nd shift of $1.00 per hour.
Moundridge, KS

Bradbury in Moundridge is hiring through LSI Staffing:



All positions are 90 day temp to hire and are on 2nd shift: 3: 30pm-Midnight. 10-15% Overtime Available.

Physically demanding positions requiring 50-100 Pounds lifting at times.

A good candidate must possess Industrial Experience with preference giving to Machinist Experience or Metal working. Must be mechanically inclined. Good work ethic and motivation. . Ability to read a tape measure and use calipers/micrometers. Ability to pass a pre-employment drug screen.

Company will train the right individual but experience is strongly preferred. Requires Steel Toed Boots.

$12-$22/hr Based on Experience. Shift differential on 2nd shift of $1.00 per hour.
Moundridge, KS

Bradbury in Moundridge is hiring through LSI Staffing:



All positions are 90 day temp to hire and are on 2nd shift: 3: 30pm-Midnight. 10-15% Overtime Available.

Physically demanding positions requiring 50-100 Pounds lifting at times.

A good candidate must possess Industrial Experience with preference giving to Machinist Experience or Metal working. Must be mechanically inclined. Good work ethic and motivation. . Ability to read a tape measure and use calipers/micrometers. Ability to pass a pre-employment drug screen.

Company will train the right individual but experience is strongly preferred. Requires Steel Toed Boots.

$12-$22/hr Based on Experience. Shift differential on 2nd shift of $1.00 per hour.
Moundridge, KS

Bradbury in Moundridge is hiring through LSI Staffing:



All positions are 90 day temp to hire and are on 2nd shift: 3: 30pm-Midnight. 10-15% Overtime Available.

Physically demanding positions requiring 50-100 Pounds lifting at times.

A good candidate must possess Industrial Experience with preference giving to Machinist Experience or Metal working. Must be mechanically inclined. Good work ethic and motivation. . Ability to read a tape measure and use calipers/micrometers. Ability to pass a pre-employment drug screen.

Company will train the right individual but experience is strongly preferred. Requires Steel Toed Boots.

$12-$22/hr Based on Experience. Shift differential on 2nd shift of $1.00 per hour.
Millard, NE

Principal Duties and Responsibilities:
1. Be familiar with the company's efforts on quality as well as the goal statements for each entity. Each action should be a reflection of striving to achieve these statements.2. Understand the basic printing terminology used in day to day operations.3. Impose customer Supplied artwork to specified template.4. Assist with checking plate imposition -- verify completeness and accuracy of composition and separations before plates are made, based on order documentation, product knowledge and production capability knowledge.5. Discuss and resolve job issues and artwork problems with sales team.6. Maintain housekeeping in personal and shared work areas.7. Comply with and support the company policy KNOWLEDGE, SKILLS AND ABILITIES: Required -- Completed High school or equivalent.Required -- One year dealing with the public, customers or through promotion from customer service assistant.Required -- Understanding of windows operating systems as well as Microsoft word, Outlook and ExcelRequired -- Proficiency in Adobe Creative Suite 4 or abovePreferred -- Well organized, handles stress well under pressure, problem solver, articulate, effective at multi tasking, effective verbal and written communication skills, works effectively with diverse personalities *You can apply in person Monday-Friday 8: 00AM-11: 00AM @ 4228 S. 50th Street in the Spring Valley Shopping Plaza.*You can also apply online @ LSI Staffing.Com.*We offer paid holidays, paid vacation, 401k, and insurance.*Ask about our employee referral program and earn extra CASH!
McPherson, KS

Polisher

Set-up and operate a variety of polishing machines and hand tools to produce a finish, often of a complex nature. Achieve specified micro finishes; polish to form sharp corners, ensure product meets customer and company specifications.

  • Set-up and operate various polishing machines and hand tools



  • Achieve specified micro finishes; polish to form sharp corners, hold specified limits on I.D. Using deburring tools with special cutters



  • Hold specified limits for polish on extruder screws, barrel I.D. S after nitriding and polishing, extruder die head vanes, manifolds, junction block, etc.



  • Ability to make up and grade polishing wheels



  • Read drawings to locate surface finish requirements



  • Use tools such as radius gages, limit gages and special measuring equipment



  • Demonstrate personal leadership; actively participate in or lead problem solving and continuous improvement efforts



  • Practice good communication with employees at all levels



  • Demonstrate flexibility when confronted with high stress or emergency situations, priority changes, or new assignments



  • Interact professionally when interacting with customers and employees



  • Work in an environmentally responsible manner



  • Understand and support Company philosophies, goals and directions



  • Produce and maintain a consistent quality of work



  • Recommend improvements for area product and processes



  • Set the department standards in areas of housekeeping, attendance and teamwork by example



Other duties as assigned



Shifts:

1st
- 8am- 4pm- Starting Pay 15.00/Hr

2nd - 4pm-12am Starting Pay 16.00/Hr

3rd - 12am- 8am - Starting Pay16.00/Hr

All shifts train on first at 15.00/HR then moved to 2nd or 3rd shift at 16.00/Hr



All Shifts are Monday-Friday, unless otherwise directed by Supervisor after Hire.

All Candidates must have High School Diploma or GED to be Considered.

Candidate Must be able to Pass a Pre Employment Hair Follicle Drug Screen.
McPherson, KS

CNC

Set-up and operate 5 axis CNC milling machine. Load cutters & programs, make adjustments to cutters and machine. Required to make accurate parts and get maximum tool life.

  • Set up CNC machine



  • Load cutters and programs



  • Use various measuring tools and instruments for precision measuring



  • Read part drawings with sectional views



  • Move controls to set specified speeds, feed rates, and spacing between wheel faces



  • Lifts and positions work piece manually or with a hoist, and secures it between wheels and on work rest



  • Work independently; assist less experience machinist



  • Demonstrate personal leadership; actively participate in or lead problem solving and continuous improvement efforts



  • Practice good communication with employees at all levels



  • Demonstrate flexibility when confronted with high stress or emergency situations, priority changes, or new assignments



  • Interact professionally when interacting with customers and employees



  • Work in an environmentally responsible manner



  • Understand and support Company philosophies, goals and directions



  • Produce and maintain a consistent quality of work



  • Recommend improvements for area product and processes



  • Set the department standards in areas of housekeeping, attendance and teamwork by example



Other duties as assigned



Shifts:

1st
- 8am- 4pm- Starting Pay 15.00/Hr

2nd - 4pm-12am Starting Pay 16.00/Hr

3rd - 12am- 8am - Starting Pay16.00/Hr

All shifts train on first at 15.00/HR then moved to 2nd or 3rd shift at 16.00/Hr



All Shifts are Monday-Friday, unless otherwise directed by Supervisor after Hire.

All Candidates must have High School Diploma or GED to be Considered.

Candidate Must be able to Pass a Pre Employment Hair Follicle Drug Screen.
McPherson, KS

Area Hospital looking to hire 1st shift Cook.

Experience preferred but not required.

 

Pay $8.74/hr.
McPherson, KS

McPherson Plastics Plant is looking to hire extrusion operators making pvc pipe. As an extrusion operator, you will be responsible for handling the product, performing basic quality inspection and stacking the products. This requires the ability to stand for 12 hours, bend, stoop and lift up to 55 lbs. This is machine driven work so you will need to keep up with the pace of the machine. Housekeeping may be a part of your job as well, which would include sweeping, cleaning the area around the machine and cleaning machine as instructed by supervisor. All the work is industrial in nature. All positions train on 1st shift for at least 2 days and include a 3 hour safety orientation.

Hours:
The Extrusion Department has a rotating swing shift schedule. Employees will be provided their schedule during orientation. Employees rotating on a 3 Days On, Two Days Off, Two Days On and Two Days off Schedule. They then rotate back and forth between days and nights every 2 weeks. With a 12 hour shift, employees only work 16 days a month. The shifts for extrusion from 7-7, and AM or PM based on your rotation schedule.



Wage
: $14.00/hr on Days and $14.50/hr Nights.



Smoking:
This Plant is a non-smoking facility. There is no smoking allowed on any company property, this includes all buildings, outside the buildings and the parking lot.



Pre-Employment Requirements:
In order to be considered for this position they require the following be met:

Candidate must have High School Diploma or GED

Candidate must have Steel Toed Boots Prior to 1st day of work

Candidate must pass pre-employment drug screen.

Candidate must pass a pre-employment physical capacity test.



To apply for this position please contact the LSI Staffing McPherson office at (620) 504-6520.
Lincoln, NE

You will be responsible for the leadership and supervision of quality and sanitary processing of linen and clothing to assure adequate supplies to all departments on a daily basis. This is a temp to hire position. A background check and drug screen will be required.

QUALIFICATIONS: ~High school graduate or equivalent required.  ~One year supervisory experience preferred.  ~Commercial linen experience desired.  ~Must possess ability to communicate with other personnel.

*Apply online at www.Lsistaffing.Com *You can also apply in person Monday -- Friday 9: 00AM-12: 00PM @ 3814 Normal Blvd.*We offer paid holidays, paid vacation, 401k, and insurance.
Lincoln, NE

You will assist in providing leadership for the Environmental Service Depart to assure quality service to our internal and external customers.  This position is dual leadership and working role which may include direct responsibility for the cleaning and disinfecting of various areas of the facility. May also be responsible for buffing, stripping and waxing of hard floors.

QUALIFICATIONS: ~One year supervisory experience and/or working in a leadership role required. ~Relevant work experience in a related area preferred.  ~Basic math skills required.  ~Basic reading skills required.  ~Required to drive a motor vehicle.  ~Must have current valid NE driver s license and a copy of current driver s abstract a good driving record.

*Apply online at www.Lsistaffing.Com *You can also apply in person Monday -- Friday 9: 00AM-12: 00PM @ 3814 Normal Blvd.*We offer paid holidays, paid vacation, 401k, and insurance.
Lees Summit, MO

Industrial Maintenance Mechanic

Packaging plant in Independence, MO is currently seeking an experienced Maintenance Technician. Will perform all of the following duties:

  • Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments.



  • Dismantle machines or equipment, replaces defective parts and motors, and adjusts feed mechanisms.



  • Will ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and packaging machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.



  • Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance.



  • Connects wire to motors, fixtures, and other electrical equipment, replaces switches and fuses, and splices wire and insulates wire with friction tape.



  • Conserves maintenance resources by using equipment and supplies as needed to accomplish job results.



  • Installing equipment, electrical and mechanical. Includes running conduit, pulling wire, connecting wire



  • General troubleshooting including checking incoming 480v power and equipment



Requirements

  • Minimum 3 years industrial electrical/mechanical maintenance experience



  • Willing and able to complete a background check and drug screen



  • Must be able to lift at least 50 lbs, climb ladders and operate hand tools and operate fork lift



  • Must have working knowledge of single-phase and 3-phase power and control systems up to 480v



Pay will depend on experience. Please send resume for review.



 

Amy Mitchell

Employment Specialist / Supervisor

161 W. U.S 24 Hwy |Independence, MO 64050

Tel 816.489.7850 | Fax 816.287.0997

www.Lsistaffing.Com|amym@lsistaffing.Com


LINCOLN, NE

LSI Staffing is looking for a safety conscious driver to serve as a Relief Driver for one of our premier distribution clients in Lincoln. You will be responsible for making runs in and around Lincoln, but there will be no over the road. You must have a clean driving record and the ability to lift up to 100 lbs. You will be responsible for loading and unloading the product from the truck in the warehouse and at the various route stops.Class A CDL license preferred.

Pay will be $13-14/hr. DOE.

*You can also apply in person Monday Friday 9: 00AM-12: 00PM @ 3814 Normal Blvd.

*We offer paid holidays, paid vacation, 401k, and insurance.


LINCOLN, NE

CNC TOOL MAKER

PRE-EMPLOYMENT SALIVA SCREEN, BACKGROUNDCHECKS.COM SEARCH
LINCOLN, NE

HANDY MAN  NEEDED

Seeking experienced  handyman for inside/outside painting, upkeep and general maintenance  in Country Club Setting.

Drug screen & background check required.

Pay $10.00 & up; DOE

 
LINCOLN, NE

Picker Position

This position will require reading the order & selecting correct product from shelving to be placed in order.

Abitlity to be on feet all day and   push carts of product. 

Ability to lift 50#s

Temp to Hire Position
KANSAS CITY, MO

We are currently seeking a sharp, motivated and qualified candidate to fill an opening we have for first and second shift industrial maintenance mechanic position in the Martin City/Grandview, MO area.

Applicants should have background in the following to be considered:

Industrial Machinery Preventative Maintenance & Troubleshooting Fabrication / New Machine Installation Forklift Operation & Maintenance Parts Inventory / Shipping & Receiving

Ideal candidates will be able to perform their daily functions with little supervision with emphasis on customer support and service.

If you are interested, please fill out an application online at www.Lsistaffing.Com or come in to the North Kansas City office located at 1531 Swift North Kansas City, MO 64116 from 9am -- 11am Monday -- Thursday.
Independence, MO

The Environmental, Health, Safety and Compliance Coordinator will be responsible ensuring the company maintains good standing with all regulatory agencies. This position will require accurate record keeping, data entry and compliance follow-up based on defined policies and procedures.

May perform any or all of the following duties
:

? Directly responsible for OSHA, EPA, AIB, FDA, USDA, Good Warehousing Practices, Forklift Safety and Local Agencies (i.E., fire department, health department and city), compliance programs development

? Oversees safety compliance follow-up notifications

? Ensures timely reporting and assists in the investigations of serious accidents, per program directives

? Provides training and communicates performance expectations for safe work practices to employees and management

? Reports compliance concerns for all site safety policies and procedures

? Review each new client to ensure programs, policies, procedures and necessary equipment is available to meet the customer s needs

? Attends training to remain current on industry trends

? Performs other duties and/or special projects as assigned in response to changing business conditions and/or requirements

Job Requirements

? Experience in regulatory compliance, training and reporting

? Must be willing to gain working knowledge of facility

? Must have excellent oral and written communication skills: communicates effectively with various contacts (internal and external)

? Must be able to prioritize multiple projects daily

? Must display strong analytical and organizational skills and have the ability to identify and implement process improvement strategies with positive business results

? Must have strong work ethics and a high level of confidentiality to ensure proper handling of sensitive information

Work Environment

? Fast paced, cold environment

Pay

? This is a 90 day, temp-to-hire position. Pay will increase upon being hired permanent and a full benefits package will be offered. Pay starts at $16.00 - $17.50 / hr.



Please email your resume to amym@lsistaffing.Com

Thanks for your consideration and we look forward to working with you!



 

Amy Mitchell

Employment Specialist / Supervisor

161 W. U.S 24 Hwy |Independence, MO 64050

Tel 816.489.7850 | Fax 816.287.0997

www.Lsistaffing.Com|amym@lsistaffing.Com

   
Independence, MO

Warehouse in Independence is currently seeking experienced Warehouse Account Manager. Excellent computer skills are a must! Must be versatile and willing to assist other departments as needed. Duties would include but are not limited to the following;

  • Assure orders and shipping quantities match picking documents through careful audit of said documents



  • Assist in resolving any discrepancies



  • Have experience with UPS / FedEx / USPS shipping procedures



  • Assists & evaluates needs with shipping points, services, weights & freight permits, and other information needed



  • Initiates, answers & documents tracer inquiries when requested via email and/or fax



  • Notifies consignee of shipment arrival and coordinates shipment information to other offices and/or agents



  • Arranges for movement of freight to consignee/agent & updates the system with information



  • Confirm physical shipment of goods and facilitate tracking of packages



  • Ensure that drivers depart with appropriate paperwork



  • Ensure the accuracy of all shipping documents by strict adherence to standard operating procedures



  • Gather, enter into warehouse management system and maintain all data and records relative to shipping and receiving activities



  • Complete necessary management reports as required



Pay will depend on experience. Please send resume for review.

Send resumes to amym@lsistaffing.Com

Or apply in person Monday Thursday from 9: 00 a.M. 11: 00 a.M.

LSI Staffing

161 W. 24 Highway

Independence, MO 64050

(816) 489-7850
Grand Prairie, TX
Job Description
Now Hiring! Customer Service Rep. $11hr. To $15







 

PAY RATE: $11 to $15 hr. CUSTOMER SERVICE REP. JOB DESCRIPTION:

PROFESSIONAL SKILLS

Customer Service, Data Entry, Organization, Attention to Detail, Multitasking (Project management a plus)

PROGRAMS

Word, MS Excel, Pack Manager

Requirements

Handle customer account. This includes documenting all activity on Excel spreadsheets, provide customer with weekly reports, double check inbound paperwork to insure accuracy, produce a potential out of stock report to check for incomplete orders, update inventory quantities in Pack Manager and manage their and our CHEP pallet account, as well as oversee 8 other accounts.

Schedule deliveries and pick up s.

Handle customer service issues through emails and phone calls. This involves tracing shipments and work with trucking companies to make sure orders are delivered in a timely manner.

Handle delivery appointments with various customers by coordinating daily receiving schedules.

Use Microsoft Word and Microsoft Excel to create reports.
Job Requirements
REQUIREMENTS: 35 WPM___ Required

Word, MS Excel, Pack Manager Please apply by responding to the ad or apply online at: www.Lsistaffing.Com To apply in person Monday through Thursday, from 8: 30am to 12: 00pm. We are located just one block south of 114 Hwy at O'Connor Ridge Shopping Center: 4835 N. O'Connor Rd.Irving, TX 75062Suite 208 Fax: 972-717-2121 For more information please call 972-717-2020
Farmers Branch, TX

WAREHOUSE JOBS AT FARMERS BRANCH! MUST HAVE A FLEXIBLE SCHEDULE AS WE SOMETIMES WORK SOME OVERTIME HOURS. SHIFT: 1st Shift REQUIREMENTS: * Some warehouse experience* Experience with RF Scanners is a plus DUTIES: Tracking, cycle counting, stacking, maintain quality control and maintain safety. Packing merchandise, labeling, unloading, loading trucks and general housekeeping. Must be able to lift up to 50lbs. To apply please respond to the ad or apply online at: www.Lsistaffing.Com To apply in person Monday through Thursday, from 8: 30am to 12: 00pm. We are located just one block south of 114 Hwy at O'Connor Ridge Shopping Center: 4835 N. O'Connor Rd.Irving, TX 75062Suite 208 Fax: 972-717-2121 For more information please call 972-717-2020
Pay Rate: $8.25 - $8.25
Dallas, TX
Job Description
Cooks Needed for Dallas and Plano $12 to $13 +Bonus

NOW HIRING FOR COOKS AT ONE OF THE BEST HOSPITALS IN TEXAS

Location: Dallas, TX and Plano, TXSchedule: FlexiblePay Rate: $12 to $13 hr. + Bonus

QUALIFICATIONS:** Must have cooking experience**Minimum one year of previous related experience is required**Knowledge of grilling, baking methods/routines, cooking procedures/methods, types of preparation and related routines
Job Requirements
Specific Knowledge, Skills and Abilities:

*Must have one year experience, must be able to pass drug screen, an extensive background check *Must possess the ability to read and speak English

IF YOU HAVE A FELONY CONVICTION, PLEASE SUBMIT IT SO THAT WE MAY PRESENT IT TO OUR CLIENT

To apply please respond to the ad or apply online at:

www.Lsistaffing.Com

To apply in person Monday through Thursday, from 8: 30am to 12: 00pm. We are located just one block south of 114 Hwy at O'Connor Ridge Shopping Center:

4835 N. O'Connor Rd.Irving, TX 75062Suite 208

Fax: 972-717-2121

For more information please call 972-717-2020
Crete, NE

Rendering - hiring 2nd & 3rd shift machine operators  for busy Rendering Faciltiy in Crete, NE.

  Apply NOW!
Coppell, TX

Now Hiring for Warehouse Janitor to start employment July 30th

Location: Coppell

Shift: 1st

Wage: $12.00hr.

Duties may include, but are not limited to: dusting, vacuuming, gathering and disposing of trash and waste materials, removing, cleaning and disinfecting bathrooms, cleaning and disinfecting fixtures, wet mopping and other similar duties Specific Knowledge, Skills and Abilities: *Must have 6 months experience as a janitor, must be able to pass drug screen, an extensive background check *Must have an stable job history*Must possess the ability to read and speak English IF YOU HAVE A FELONY CONVICTION, PLEASE SUBMIT IT SO THAT WE MAY PRESENT IT TO OUR CLIENT. To apply please respond to the ad or apply online at: www.Lsistaffing.Com To apply in person Monday through Thursday, from 8: 30am to 12: 00pm. We are located just one block south of 114 Hwy at O'Connor Ridge Shopping Center: 4835 N. O'Connor Rd.Suite 208Irving, TX 75062 Fax: 972-717-2121 For more information please call 972-717-2020
Carrollton, TX

Now Hiring Receptionist / Clerical at  Carrollton Area! PAY RATE: $11 to $15 hr JOB DESCRIPTION: Will be handling inbound and outbound calls, Data entry, supporting the Sales team with mail and other duties throughout the office. 30 wpm typing speed.Will be greeting visitors, providing directions to callers, data entry etc.Must be a multitasker.Must be able to learn quickly. Strong customer svc skills REQUIREMENTS: 40 WPM___ RequiredExcel, Outlook and Word knowledge Please apply by responding to the ad or apply online at: www.Lsistaffing.Com To apply in person Monday through Thursday, from 8: 30am to 12: 00pm. We are located just one block south of 114 Hwy at O'Connor Ridge Shopping Center: 4835 N. O'Connor Rd.Irving, TX 75062Suite 208 Fax: 972-717-2121 For more information please call 972-717-2020
Andover, KS

Manufacturing/production company in Andover, KS.

General warehouse duties:

Labeling, Stocking, Filling, Cleaning

 

Must be able to work in extreme heat, and provide own steel toed boots.

Drug test, full physical, and back ground check required.
Copyright © 2008 LSI Staffing. All rights reserved.